How to Change Filter Samsung Fridge?

You’ve come to the right site if you’re looking for information on how to replace the filter on a Samsung refrigerator. It’s easy to do and shouldn’t take more than a few minutes to replace your water filter. Check the indicator light on your refrigerator if you’re unsure if the filter needs to be replaced. The indicator will change in six months. When it wasn’t previously illuminated, it lights up on specific models, while on others, it turns red. At this point, you ought to immediately replace the filter.

This article will explain easy steps to change the filter on Samsung Fridge.

Where Is the Samsung Fridge’s, Water Filter?

Before purchasing a new Samsung water filter, you must first determine which model you currently own. This enables you to purchase the appropriate replacement. The filter in a Samsung refrigerator can be changed with another brand and still function just as well, but you must know the model number of your refrigerator to locate suitable fridge filters. This ensures that you and your family will only receive the most excellent filtration possible.

Depending on the refrigerator model, a Samsung refrigerator has a different position for the water filter. Your water filter could be placed in one of three locations. The water filter is most likely located in the refrigerator compartment, between the crisper doors, if your refrigerator is a French door model. The water filter is often located at the back of the refrigerator or in the correct top interior of other models. You may always get help from us if you can’t locate your water filter or figure out your refrigerator’s model number.

Why Should Your Fridge Filter Be Replaced Every 6 Months?

Contrary to popular belief, you do not just need to replace your refrigerator’s filter when the indication light flashes. Your health is at stake if you wait until the light turns red.

A water filter stops impurities from entering the pipes and contaminating your drinking water. All the impurities that were caught can now leak through the water filter and end up in your drinking water, making it dirtier than if you hadn’t used a water filter.

How do I replace the filter in a Samsung refrigerator?

When the filter indication light becomes orange or pink, it’s time to change the filter. The filter has to be changed when it turns red. To maintain the high calibre of your drinking water, we nonetheless advise changing the filter even if the indicator light hasn’t turned red after six months.

The following are simple instructions for changing internal filters.

1. Turn the old water filter 45 degrees to the left to remove it.
2. The water will now turn off automatically while you gently remove and discard the old water filter.
3. Place the new water filter there and turn it rightward 45 degrees.
4. If the padlock symbol matches the symbol on the filter, it is in the right place.
5. After installing the replacement filter, press the water filter reset button for three seconds to reset the light indicator.

These steps should be followed to replace the external filter.

1. Turn off the water supply.
2. Please take out the old cartridge, then throw it away.
3. The arrow flow symbol on the water filter should be towards the refrigerator.
4. By firmly inserting the tubing into the fitting end of the filter until it is completely sealed, attach the inlet and output tubing to that end.
5. Make the tubing square and free of scuffs; if necessary, cut it.
6. Incorporate the filter clip as directed by the installation manual.
7. Check the filter for leaks after turning on the water.
8. Repeat the installation procedures and make sure there are no leaks.
9. Remove the filter and contact customer assistance if the leaks persist.
10. Give the water five minutes to pass through the filter and clean the system.

Do You Need To Turn Off The Water To Change The Filter In Your Samsung Refrigerator?

You don’t need to turn off the water to change the filter because Samsung refrigerators with internal filters include an auto shut-off valve. We advise against turning off the water because doing so can occasionally result in installation problems, such as airlocks or water that sputters or doesn’t come out when the water supply is turned back on.

However, when replacing or switching out the filters on Samsung refrigerators with external filters, the water must always be turned off first. This is typical because they are inline filters with merely tubing at each end that is directly attached to the water mains and no auto shut-off valve. If this is the filter you need, turning off the water supply before changing is essential to prevent a flood of water from this connection.

The only time it may be essential to turn off the water supply to a Samsung refrigerator with an internal filter is when high water pressure makes it impossible to remove or reinstall the filter; nonetheless, it is nearly always preferable to release pressure by dispensing some water.

Do I Need a Water Filter for My Samsung Refrigerator?

Water filters eliminate impurities from ice and drinking water, including lead, mercury, and chlorine. The majority of Samsung refrigerators continue to operate without a water filter attached. Although the water filter in the refrigerator may be bypassed, and you can still get water without one installed, this does not imply you should keep using your Samsung refrigerator without one.

Everyone should have access to the purest, cleanest water in their homes, in our opinion. Even though you might initially be unsure of how to do it, replacing your water filter is a simple procedure that enhances the quality of your drinking water and ice and safeguards your refrigerator. If you don’t change your old filter after six months, the mineral buildup may occur, leading to pricey malfunctions in your refrigerator.