How To Repair LG Washing Machine?

Washing machines are among the many home appliances that LG has produced throughout the years. LG Washing Machines are still subject to wear and tear, just like all washers. The most frequent problems with LG washers include excess water due to a faulty water inlet valve, cables breaking, the washer not spinning, generating noise, and not draining. Check out the helpful guide created by our specialists, complete with straightforward advice on how to fix an LG washing machine, so you can quickly fix your cherished household laundry device rather than having to replace it after a year or two.

Through this post, you can fix your LG washing machine.

1- LG Washing Machine not draining

A common LG washer issue is a drain pump that isn’t working correctly, which prevents the washer from draining.

Take the following simple actions to fix a drain pump:

1. Remove the washer’s electrical connection.
2. The washer’s water supply should be turned off.
3. The effective access panel should be removed.
4. The drain pump wire connector must be disconnected.
5. Use pliers to unclamp the clamps holding the drain hose to the pump. Cut the drain hose off.
6. To remove the drain pump mounting screws, use a 5/16-inch socket.
7. From the washer, remove the pump.
8. Look for damage or obstructions in the pump.
9. Check the continuity of the pump with a multimeter. If there is no continuity, the drain pump needs to be changed.

2- LG Washing Machine not starting

The washing machine won’t start the most basic washing machine malfunction. Nothing happens after you load the laundry into the washer, turn the dial, or push the “on” button.

Your LG washing machine should start by.

1. Ensure that the device is plugged in.
2. Investigate the circuit breaker.
3. Examine the lid.

3- LG Washing Machine not cleaning clothes

Because you don’t see it until the clothing has completed an entire cycle, this could be one of the more annoying washer issues.

To solve the situation.

1. See if there is any overload.
2. Change the detergent.
3. Separately wash any pet products.

4- LG Washing Machine not spinning

Don’t worry if your washing machine isn’t spinning; it’s not a huge deal. Your LG washing machine is simple to fix.

For your washing machine to spin.

1. Rearrange the clothes.
2. Verify the machine’s floor level.
3. Verify the drain line and drainage system.

5- LG Washing Machine making noise

This is one of the more annoying washing machine issues when the washer creates rustling noises, grinding, or thumping noises during the agitation or spin cycles.

To make this scenario better.

1. Take into account lubricating or changing the tub bearings.
2. Verify the belts.

6- LG Washing Machine vibrating or shaking

Your washing machine may shake or vibrate ferociously while running, especially during the spin cycle, frequently to the point where the machine starts to move.

To make this scenario better.

1. Your device could require rebalancing.
2. If required, tighten the connection straps or change the straps entirely.
3. Make sure the load is balanced.
4. Examine a vibration-reducing pad.

7- LG Washing Machine overfilling or leaking

The water inlet valve malfunctioning is another problem that frequently affects LG washing machines. The valve may develop a flaw due to calcium buildup or regular wear and tear.

For the water inlet valve to be checked.

1. Turn off the washer’s electricity.
2. Turn off the washer’s water supply.
3. The washer’s water hoses should be disconnected.
4. The effective access panel should be removed.
5. To make reassembly of the washer easier, take a snapshot of the connection of the water inlet valve.
6. Disconnect the solenoid wires from the old inlet valve.
7. The four hoses attached to the water inlet valve can be unplugged using pliers to disengage the clamps.
8. The water inlet valve must be removed from the washer by removing the mounting screws holding it in place.
9. Examine the water entry valve for damage and obstructions to the screens inside, such as debris.
10. Check the water inlet valve’s continuity using a multimeter. A water inlet valve should have resistance readings between 500 and 1,500 ohms.
11. A broken water inlet valve should be replaced. Notably, the majority of washer repair specialists advise against attempting to fix the water entry valve and instead advise replacing it.

8- Broken position sensor wire or the motor wire harness

Another issue affecting LG washers frequently is the breaking of several wires in the motor wire harness due to the washer’s vibrations. Typically, the problem results in the washer making strange noises during the spin cycle.

To inspect the position sensor and motor wire harness.

1. Turn off the washer’s electricity.
2. Cut off the washer’s water supply.
3. To find the motor wiring harness, remove the necessary access panels.
4. Remove the rotor assembly from its mounting nut by unthreading it.
5. The stator mounting bolts can be removed with a socket.
6. Check for burned or broken wires in the motor wire harness and the position sensor.
7. Replace any broken wires or damaged wire harnesses.

Conclusion

These problems are the easiest to solve. If your LG washing machine has any of these problems, you can repair them yourself. Apart from these problems, you need a professional expert to repair your LG washing machine. Repair Service UAE has a professional team for all LG washing machine problems. Bring your LG washing machine to us.