How to Replace Carbon Brushes on a Siemens Washing Machine?
Every washing machine has an electric motor, and some of those motors have brushes. The brushes’ function is to carry energy from the motor’s fixed sections (the windings) through its moving parts (armature this is where the brushes sit onto the commutator). If the carbon brushes in your Siemens washing machine aren’t functioning properly, you should replace them. Because a worn-out or broken carbon brush cannot be repaired, the only option is to replace it with a new one, which is actually fairly easy to perform.
If you are looking for a professional & authorize washing machine repair abu dhabi, sharjah & Dubai then contact to Repair in UAE company.
How Can You Tell If Your Carbon Brushes Need to Be Replaced?
You will notice the following symptoms when your motor brushes are worn:
No Electricity: If the tool starts cutting off while being used, that is the last indication that your carbon brushes need to be replaced. This is a blatant indication that they are entirely worn out.
Lower performance: The tool will no longer work as well, which is one of the first things you’ll notice. It might need to be shaken to start, and it probably won’t turn at as high of an RPM as it once did.
Sparkings: Power tools occasionally produce small sparks, but not frequently huge ones. This is an indication that your carbon brushes need replacing. Through the cooling vents of your tool, you may observe the sparks, which should allow you to determine whether the situation is growing worse.
Burning odour: The second typical sign of a faulty carbon brush is the burning odour. The fact that there is friction between the pieces indicates that the brushes are fully worn out.
How can I replace the Siemens washing machine’s carbon brushes?
You can easily replace your Siemens Washing Machine’ carbon brushes by following three steps.
1. Remove the spade connector, which includes a locking mechanism, from the brush tag in order to proceed.
2. Next, align the H section of the brush tag with the holder’s main casing. The brush tag will then flip out, allowing you to remove the brush from the holder.
3. As you remove the carbon brush, note its angle so you can properly position the new ones when you replace them. The carbon brushes are therefore actually inserted at an angle into the commutator. As a result, the ends of the carbon brushes themselves are angled. Make careful to insert them the correct way around.
Advantages of Keeping Carbon Brushes
Whatever your power tool may be—whether it’s something you use at home or something you use every day for work—you should think about keeping it in good working order. While it is fine to allow your power tools inform you when the carbon brushes need to be changed, it is not always the best course of action. While there is no need to regularly inspect the tool, it can be beneficial to sometimes check the carbon brushes to make sure they are in good condition and serve their intended purpose.
You shouldn’t keep used carbon brushes in your power tool for an extended period of time since this could harm the armature, which is an expensive repair in and of itself. Consequently, be alert for the obvious symptoms of malfunctioning power tools, foul odours, and sparking since these will signal that the carbon brushes need to be replaced.