How to Replace Water Filter in LG Fridge?

You should change the water filter in your refrigerator at least once every six months to ensure that you always have clean, fresh water in your house. An LG refrigerator’s water filter may be changed quickly and easily in just a few simple steps. The instructions for changing the water filter in an LG refrigerator are provided below, along with information on where to get replacement filters. You can keep drinking fresh, clean water by following these instructions.

When Should You Replace the Filter in Your Fridge?

Depending on how frequently you use the water from your refrigerator, you should replace the LG fridge water filter every six months (or sooner). When it’s time to update your filter, specific models offer an alert that lets you know.

A buildup in the water filter could cause slower-than-normal water flow. This can be an indication that something needs to change.

Steps to Replace Water Filter Water in LG Filter

You must locate the water filter in the LG filter before replacing it.

1. Turn off the water supply at the refrigerator’s back. The shutdown valve should be closed entirely to guarantee that no water enters the appliance while changing the filter.
2. Next, press the dispenser lever to empty the water from the device. Continue pulling the lever until no more water is released.
3. Locate the refrigerator filter and place a towel on the floor below it. It is usually located in the upper left-hand corner of the fridge compartment.

Step 1: Remove the filter

Lift the lower bin and remove it. To remove the water filter from the filter head, swing the right end of the filter out of the compartment, get hold of it, and turn it counterclockwise.

Step 2: Install the new water filter

Remove the protective cover on the rubber o-rings and the new filter from the package. When the arrow on the replacement filter aligns with the arrow on the filter head, place it into the filter head and turn it clockwise. Reposition the filter inside the compartment.

Step 3: Remove trapped air

Reposition the lower door bin to where it belonged. Dispense water to clear the system of pollutants, loose charcoal, and trapped air. Depress and then release the dispenser pad for 30 seconds on and 60 seconds off.

Step 4: Reset the water filter indicator

Your LG refrigerator’s filter indicator can be easily reset. The control panel button must be pressed and held down until the device shuts off. Usually, you’ll need to press and hold the button for three seconds. By looking at the control panel, you can see the time that applies to your model. On the filter indicator button, the duration is printed.

How Can A Stuck LG Water Filter Be Fixed?

It’s typical to need help removing a worn-out water filter from the compartment. However, your filter will only become stuck if you know how to remove the LG fridge water filter. The following advice can assist in removing a stuck LG water filter.

1. Remove the top shelf if your water filter is in the refrigerator’s upper-right corner. As a result, you have more room to draw the filter downward and remove it.
2. The filter removal process may be challenging due to the refrigerator’s water pressure. Dispose of any remaining water after shutting off the water line before replacing the old water filter to lessen pressure.

You should get in touch with a pro to assist with filter replacement if the filter is still stuck. If you need professional service for this, then contact us today.

FAQs

How Often Should I Replace the Water Filter in an LG Fridge?

You should replace the water filter in your LG refrigerator every six months. To remind you, the control panel’s indicator will light up.

How can I tell when my LG water filter needs to be changed?

When six months have passed since your last change, it’s time to change your filter. At the same time, a control panel indicator will let you know that a change is required.

Do I Need To Replace The Water Filter In My LG Refrigerator Every Six Months?

You must replace your water filter every six months. If you don’t, the filter will fill up with dirt and other contaminants. This will result in a reduced water supply, contaminated water, and water that tastes bad.