Why Fridge Not Cold?

It can be worrying if your refrigerator isn’t cooling correctly. Your food may spoil faster in a warm refrigerator, which raises the possibility of food poisoning. In addition, you might have to spend a lot of money replacing all the food and beverages in your fridge. If you came to our page to find out why your refrigerator isn’t cold, we have a comprehensive list of the main reasons you need to know.

The following common causes can result in your refrigerator appearing to stop cooling suddenly:

1. Power Supply is Off.
2. Problem with the evaporator.
3. The condenser fan is broken or stuck.
4. Insufficient space clearance.
5. The thermostat is not set correctly.
6. Filthy or unreliable gaskets.
7. Unclean condenser coils.
8. A defective circuit board.
9. Clogged vents.
10. It’s overflowing.

Why does my freezer function, but my refrigerator does not?

There may be several reasons why your fridge isn’t cooling while your freezer is:

1. The damper control could be closed or stuck.
2. A defective thermistor.
3. A defective thermistor is misreading the temperature.
4. A new temperature circuit board is required.
5. A defective or impaled evaporator fan.

Check the Following Components If Fridge is Not Cold

Check the following components of the fridge. If your fridge is not cold, you can fix your fridge by checking these components of the fridge.

1- Unplug Fridge

If your refrigerator isn’t cooling, ensure it’s still plugged in, and the switch at the breaker box that powers your kitchen appliances hasn’t been turned off. Check the power supply if you open your refrigerator; neither the light nor the refrigerator is cooling.

2- Contaminated Condenser Coils

On the condenser coils of your refrigerator, dust, grime, and other debris may accumulate over time. Blocked coils may make the compressor work harder than necessary and make it more difficult for the heat from your refrigerator to discharge. Cleaning your coils every two to three months is advised to help prevent this issue if the area around your refrigerator is very greasy or dusty or if it is sufficient.

3- Broken or Stuck Condenser Fan

Most refrigerators have at least one fan, typically mounted on the back of the refrigerator. This fan helps prevent compressor overheating by keeping the condenser coils cool. If your fan suddenly stops functioning, you might wish to get it repaired by a professional.

4- Thermostat Isn’t Set Properly

For optimum functioning, your refrigerator’s temperature should be maintained between 32° and 40°F. Ensure your thermostat is set within that range if your refrigerator stops cooling. Depending on where your refrigerator’s thermostat is located, it can be simple for little children to change the settings accidentally or for food items to knock into the switch.

5- Obstructed Vents

Overfilling your refrigerator with food might obstruct the cool air from properly circulating and clogging the vents. For a fridge to chill effectively, there needs to be adequate ventilation. Move any objects obstructing the vents and arrange your refrigerator to ensure proper airflow. Your freezer vent could occasionally be iced over. In this situation, you should eliminate

6- Dirty or Faulty Gaskets

The gaskets may become dirty or damaged with time, making it difficult for your refrigerator to seal securely. The gaskets aid in maintaining cold air inside the refrigerator compartment and preventing it from evaporating. If you see chilly air leaking from your refrigerator, use a sponge and warm, soapy water to clean the gaskets and edges of the device. If your gaskets have been cleaned but the air is still escaping, and your refrigerator is still not cooling, call for service so a specialist can determine if your gaskets need to be replaced.

7- Defective Circuit Board

If your fridge isn’t cooling correctly even after eliminating other potential issues and trying troubleshooting, you might have a bad circuit board. The best course of action may be to hire a professional to diagnose and fix these, as replacing them might be costly.

8- Not Enough Space Clearance

Heat is released during the chilling process of refrigerators as the refrigerant condenses from vapour to liquid. To operate at its best, your fridge needs at least 1 inch of rear clearance and 1 inch of side clearance. Check that you have the necessary clearance space for your refrigerator to operate correctly by consulting the installation instructions that came with your refrigerator.

Easy Steps to Fix Your Warm Fridge

There are following easy steps to fix your fridge.

1- Check The Power Supply

Ensure the fridge’s power supply is turned on and the thermostat hasn’t been unintentionally lowered.

2- Clean the Fan

If not, make sure the fan is in good condition. To prevent an electric shock, turn off the power to your refrigerator first. Remove any obstructions from the fan blades and pull the refrigerator away from the wall. After properly cleaning the fan blades, plug the refrigerator back in to test the fan’s functionality. You will need to replace the fan if it doesn’t.

3- Coil Cleaning

To try to restore the ideal temperature in your refrigerator, it is also worthwhile to clean the evaporator coils. Locate the coils behind or beneath the refrigerator unit with the power off. After removing any substantial material by hand, carefully vacuum the coils to remove any accumulated dust and filth.

3- Unload Some Items

Remove some items from your refrigerator to allow more air to circulate if the power supply and thermostat settings are satisfactory. In your freezer section, look around the vents and remove anything that might obstruct the flow of cold air. After a few hours, shut the doors and check the temperature. If your refrigerator starts to cool off, you most likely overload it.

4- Contact A Professional

If none of these do-it-yourself warm fridges fixes, there might be an issue with your refrigerator’s defrost feature or control board. Consider hiring a professional expert to fix your fridge, as these problems are frequently too complicated to handle alone.